render() always rotated the landscape design 90 degrees -- right for the 24 mm
narrow stock, which feeds narrow-edge-first, and wrong for the 65 x 35 UHF roll,
whose 65 mm is the WEB. On that roll the rotated design ran along a 35 mm label:
printed sideways and clipped after ~35 mm, seen on the bench.
rotate now defaults from the profile (rfid65: False) and only an explicit
argument overrides it, so the Dymo path (which passes rotate itself) is
untouched. When a label-printer profile is unrotated the canvas is still the
media -- web x pitch, 65 x 35 -- with the 64 x 34 design centred, not an
art-sized bitmap; that art-sized case is kept only for the Dymo, whose head is
wider than its label. Offline render verified 520 x 280 px = 65.0 x 35.0 mm,
upright.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
web 65 / pitch 35 / gap 0 / art 64x34. 65 is the roll width and 35 the label
length: sent the other way round (SIZE 34,65.35) the printer advanced nearly two
labels per feed, which presented as an inlay that never stopped at the antenna.
gap=0 because the inlay fills most of the label and blinds the optical gap
sensor. Proven with a real print-test on this roll -- printer returned Ready, no
VOID -- so callers stop passing w/h/gap overrides.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Answers "can we direct print to the Dymo via CUPS, or is it the cmd-P dance?":
neither. The LW450 (0922:0020) is a bidirectional USB printer-class device just
like the Urovo, so its raster protocol goes straight to the bulk endpoint -- no
DYMO driver, no CUPS queue, no print dialog. Command set taken from DYMO's own
LabelWriter 450 Series Technical Reference Manual and documented in dymo.py.
Verified on the bench: revision 1750111r53, status 0x03 Ready, 283 raster lines
at 82 bytes/line accepted.
Also corrects an assumption inherited from daemon.cs: UHF WRITE commits
immediately and does NOT wait for PRINT. Confirmed by writing a chip and reading
it back with no PRINT sent. Two consequences:
- the Urovo can program a chip without printing or consuming a label, which is
what makes the Urovo-encodes/Dymo-prints split work at all;
- an encode can be verified BEFORE printing, so a failed write never costs a
label. /print-encode and /encode both do this now.
New routes: /devices (all three devices at a glance), /encode (chip only),
/print-paper (Dymo), /tag-and-print (Mode A in one call).
label.py is now resolution-aware (203 dpi Urovo / 300 dpi Dymo via profile(dpmm=))
and orientation-aware: the Urovo's 24mm web feeds narrow-edge-first so the design
rotates 90 degrees, while the Dymo's 57mm head is wider than the label so the same
design feeds landscape unrotated.
Also fixes tag read parsing: with dataFormat 'H' the printer replies in ASCII hex
TEXT, not raw bytes -- the old code hex-encoded it a second time. flush_in() now
drains fully, since a late reply to one command was being attributed to the next
and silently corrupting reads.
KNOWN ISSUE: the Node rfid-daemon (Chafon + scale + inventory) also binds :7790.
Both cannot run at once and this service does not implement its routes. Unresolved.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
ASSESSMENT.md §7 assumed the RFID encode was locked inside the Windows-only
GTSPL_SDK.dll and would need a USBPcap sniff or the GTSPL Java jar to recover.
It didn't. The DLL is a managed .NET assembly, and its IL shows every RFID call
is a one-line String.Concat -> ASCII -> WritePrinter. Recovered from ldstr order
plus argument order, and confirmed by a second independent decompile:
UHF WRITE H,2,12,E,"<24 hex>" UHF READ/QUERY ...
UHF GEN2 EPC|TID|USER|ACCESS|KILL <action>,"<pw>"
SET RFID <tagType>,<rw_pos>,<void>,<try>,<err>,<speed>,<retry> (dots, not mm)
&DEFAULT,i &CALIBRATE,A,R PRINT <set>, <copy>
So the whole recipe is plain ASCII over the printer's bulk endpoint and ports to
macOS with no vendor binaries at all.
- mac/urovo.py USB transport + full GTSPL command set, status decoding, the
ribbon-latch recovery, SKU<->EPC packing ported from daemon.cs.
- mac/label.py PIL bitmap renderer -> TSPL BITMAP. Media-profile driven, so both
shop stocks work (small 51x19 and large 55x24 on the 24mm web),
with a safe-area inset so the design can't clip at the edges.
- mac/daemon.py :7790 HTTP service, same routes/JSON/CORS as daemon.cs, plus a
/preview route that renders a label as PNG without printing one.
Verified on the bench from macOS: printer identifies (MODEL:UROVO-D812R), the
latched 0x08 "out of ribbon" clears with SET RIBBON OFF + FORMFEED, and labels
print correctly oriented and dark on the 24x55 stock.
NOT yet verified: the RFID encode itself. It is wired and the printer accepts the
command, but the loaded thermal stock has no inlays so nothing has been written to
a chip. Needs a PET RFID label at the antenna. The SKU<->EPC byte layout also
remains unconfirmed against existing Chafon-written tags.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
