A measured t2,p3,p4,t2b on 4x shackle + spare at hp 58 / 1 lost. This
suite says hp 36 / 2 lost. Went through every way the two harnesses could
differ and ruled each out by measurement, not argument:
tree wind-shelter on vs off -> hp 36 either way
tension 0.6/0.75/0.9/1.0 -> hp 36, 2 lost, all four
drain wiring garden.step's signature changed to take hail+rain
separately, but the arithmetic is identical
yard geometry diffed all 12 anchors against the live game: no drift
frozen sway live sway is WORSE, not better (t2 4.4 -> 4.6 kN)
What's left isn't a harness difference, it's arithmetic. t2 peaks
4.4-4.9 kN on this quad; a shackle is rated 3.2. t2 cannot hold under any
variation above. Losing it spends the only spare, then p3 (3.7) or t2b
(3.4) — also over 3.2 — goes too. Two corners down, the sail stops
shadowing, and hp lands on 36, which is exactly the bare-bed score. That
constant is why every configuration returns the same number: 36 means
"the rig contributed nothing".
Nor is it rescuable by shopping: rating up t2 ($80 with a spare) still
ends 36/2, because p3 and t2b break instead. The quad needs three corners
above shackle grade and $80 buys two.
So the skip is deleted and the assert is RED again, which is the true
state. I believe A's 58 is the artifact — most likely the same
phase-boundary contamination that produced my own hp=99 last sprint
(rigSail then advancing the phase machine re-rigs from the game's own
RiggingSession, so you score a rig you didn't choose). A: assert your
rig.corners' anchorIds and hw names immediately before your storm loop.
If they match what you bought, I'm wrong and the cause is still open.
Two real harness bugs found and fixed on the way, neither of which changed
the verdict: fly() never called setSheltersFromTrees (main.js:369 does),
and shop() hardcoded tension 0.9 while the dial's neutral is 1.0. A suite
claiming to be the single source of truth doesn't get to skip steps the
game takes.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
098fcc963b